Open navigation

Download firmware / Metronix servoCommander

Here you find all available firmware versions and Metronix servoCommander of our servo drives.

Only the languages German and English are supported.

For other languages, please contact your regional sales partner.

The firmware to be used depends on the device variant!

Metronix ServoCommander

Metronix ServoCommander

Description
The software is qualified for the servo drive smartServo BL 4000-C/M/D and ARS 2000 FS/SE Version 5.0.0.1.5
Size
366 MB

Description
The software is qualified for the servo drive DIS-2 Version 2.4.0.7.2
Size
29 MB

smartServo BL 4000-C/M/D

smartServo BL 4000-C/M/D

Description
The firmware is qualified for the servo drive smartServo BL 4000-C/M/D Version 2.0.0.2.1
Size
657 KB

ARS 2000 FS

ARS 2000 FS

Description
The firmware is qualified for the servo drive series ARS 2000 FS (Functional Safety).
Version 5.0.0.1.4
22.08.2023
Size
1282 KB

Description
The firmware is qualified for the servo drive series ARS 2000 SE (Standard Edition).
Version 4.0.0.1.5,
03.04.2014
Size
590 KB

Name 
ARS 2000
Description
The firmware is qualified for the servo drive series ARS 2000.
Version 3.5.0.1.9_iS (Safe stop),
14.03.2011
Size
1.564 KB

DIS-2 48/10

DIS-2 48/10

Name 
CANopen
Description
Version 3.5.0.6.1. - 19.02.2020
all versions IC / FB / FB FS STO
Size
73 kB

Name 
PROFIBUS
Description
Version 3.5.10000.6.1 - 03.03.2020
all versions FB / FB FS STO
Size
72 kB

Name 
EtherCAT
Description
Version 3.5.20000.6.1 - 19.02.2020
all versions FB / FB FS STO
Size
73 kB

DIS-2 310/2

DIS-2 310/2

Name 
CANopen
Description
Version 3.5.6000.6.1 - 19.02.2020
all versions FB / FB FS STO
Size
72 kB

Name 
PROFIBUS
Description
Version 3.5.16000.6.1 - 03.03.2020
all versions FB / FB FS STO
Size
72 kB

Name 
EtherCAT
Description
Version 3.5.26000.6.1 - 19.02.2020
all versions FB / FB FS STO
Size
73 kB

Information

Metronix Meßgeräte und Elektronik GmbH alerts its customers that at the current state of technology, it is not possible to develop software products to run flawlessly in all applications and combinations. Metronix Meßgeräte und Elektronik GmbH does not accept any liability for the flawlessness of the software. On particular, Metronix Meßgeräte und Elektronik GmbH will not guarantee that the software products will meet the buyer’s requirements or that it will work with the selected products. Metronix Meßgeräte und Elektronik GmbH does not accept any liability for consequential damages, resulting from the interaction of the software products with other products or resulting from improper handling of machines or systems.